How to Instructions - Gen 1

Protect Your Warranty

Gen I - Cozy Roadie

Breaking in your Cozy Roadie

Remember! Forcing the seatback lever can and will break it.

USING THE LEVER TO RELEASE BACK OF CHAIR AND FOLD CHAIR-BACK TO THE SEAT: The lever on the back is attached to a steel cable connected to locking pins inside the chair. Newly installed, this mechanism can be a little stiff. During early use, one must operate the lever without forcing it, until it loosens a bit with regular use. To release the pressure on the interior seatback locking mechanisms, while the chair is upright, standing behind the chair, gently pull the “chair's seatback” towards you just slightly to release pressure on the locking pins, then raise the back lever and let the chair back fall forward to the seat. This extra step should not be necessary after regular use.

QUICK RELEASE IS WARRANTED TO 275 lbs.: Both the Cozy Roadie Chair and the Quick Release are warranted at 275 lbs. This is critical information, because if an individual drops their full body weight into the chair, and the impact is greater than 275 lbs., it can push the Quick Release beyond intended limits. If the Quick Release is pushed downward into a lower position on the gas cylinder, beyond the adjustable the distance between the Quick Release and seat plate, this distance may be too great (out of range) for the Quick Release to function properly. If this happens, contact our office for instructions regarding disengaging the Quick Release. Meanwhile, you can still pack the gas cylinder/quick release/seat plate together as one unit, into the case. 

Please Follow These Very Important Directions On Proper Operation Of The Quick Release!

Click on the image to download

 

Follow These Steps Carefully

Click on the image to download

The Key Parts of your Cozy Roadie

https://cdn.shopify.com/s/files/1/1614/4687/files/E48482_AI_213_-English_2018.07.12.pdf_Page_2_1024x1024.jpg?v=1551759525
Click on the image to download 
 

Putting your Cozy back in the case

https://cdn.shopify.com/s/files/1/1614/4687/files/Exploded_Chair_Diagram.jpg?6816821826892890415

Click on the image to download 

 

Watch this 2 minute video

Putting the Genie back in the Bottle!

Proper Operation of the Quick Release

Removing a Stuck Cylinder in Seat-Plate

Adjusting The Quick Release Mechanism

 

Installing The Quick Release Mechanism